Hey there, sunseeker! Select your shipping destination to shop locally:
Gift guide C'EST LA SAISON Le guide ultime des cadeaux Lumie Wake-up lights catalog
Lampes de réveil
Réveil naturel avec un lever de soleil personnalisé
SAD & energy lights catalog
TAS et Lumières d'énergie
Votre dose quotidienne de positivité
Bedbug for kids
Bedbug pour les enfants
Aide au sommeil 3 en 1 pour bébés et enfants
Ampoules Adaptateurs Pièces détachées
Simulateurs d'aube
Bodyclock Shine 300 Assistance
Bodyclock Shine 300
Questions fréquemment posées
Why can’t I get the sunset feature to work?
Before activating the sunset feature button, make sure that the light is turned on to full brightness. Once the light is at full brightness and the sunset has been activated, the light should slowly dim over the duration that you have selected.
Why isn’t the light switching off completely at the end of the sunset?
The nightlight feature may be switched on, meaning that the light will stay on at a low level throughout the night after the sunset has finished. You can switch this off within the settings menu by selecting ‘0’ next to the nightlight option.
Why does the sunset finish faster than the selected duration?
The sunset duration is relative to starting from full brightness. If you start your sunset from half brightness, it will take half the time to reach full darkness.
Why isn’t the tap snooze feature working?
If the tap snooze feature isn’t working when tapping the lamp cover, try to tap towards the bottom of your Bodyclock Shine 300. Often the bottom is more responsive (this can be either the front or back of unit) as this is where the vibration receptors are.
Does the display stay on during the night?
There is an option to keep the display on at a low light during the night so that the time is visible or alternatively, it can be switched off completely.
The light on my Bodyclock Shine 300 has started turning on and off by itself. What can I do to fix this?
It sounds like your Bodyclock Shine 300 may have accidentally been switched into 'demo mode'.  This happens when the ‘+’ button is pressed and held for too long (approx. 20 seconds).

To exit this mode, you can press and hold the '-' button for approx. 20 seconds. You should see the display briefly flash.
Votre guide vidéo d'installation étape par étape
Vous avez encore besoin d'aide ?
Si vous souhaitez discuter avec nous, vous pouvez utiliser l'option webchat (disponible sur les ordinateurs de bureau) ou nous contacter par courrier électronique à l'adresse info@lumie.com. Nous sommes ouverts du lundi au vendredi de 9h30 à 17h30 et nous nous efforçons de répondre à votre demande dans un délai d'un jour ouvrable. En période de forte activité, ce délai peut être légèrement plus long, mais nous répondrons toujours à votre demande dans un délai d'une semaine ouvrable.